Renacon Wall Putty Fine – 40 kg

Renacon Wall Putty Fine – 40 kg

Renacon Wall Putty Fine is a cementitious polymer-modified wall putty designed to provide a smooth and even surface before painting.

It is suitable for plastered and concrete walls and ceilings and can also be applied to hollow blocks, precast walls and aerated lightweight blocks, including AAC blocks.

For construction projects in Chennai and surrounding areas, Renacon Wall Putty Fine can be used as a finishing material after the underlying wall surface has been properly prepared.

Key Benefits

• Suitable for interior and exterior applications
• Strong bonding with suitable wall substrates
• Helps smooth uneven wall surfaces
• Good water resistance
• Easy to mix and apply
• Suitable for plastered and concrete surfaces
• Suitable for AAC block and other aerated lightweight block surfaces
• Provides a smooth surface before painting
• Can help improve paint coverage when properly applied

Suitable Applications

Renacon Wall Putty Fine can be used on:

• Interior walls
• Exterior walls
• Ceilings
• Plastered walls
• Concrete surfaces
• Hollow block surfaces
• Precast walls
• Aerated lightweight blocks
• AAC block walls

Renacon Wall Putty Fine for AAC Block Walls

Renacon’s technical documentation specifically includes aerated lightweight blocks among the suitable substrates for the Fine grade.

Before application, the AAC or other masonry surface should be properly prepared and free from dust, grease, oil, loose particles and other contaminants.

For an AAC construction project, the wall-finishing system should be selected according to the condition of the substrate and the required final finish.

How to Apply Renacon Wall Putty Fine

1. Prepare the surface

Ensure that the surface is structurally sound, clean and free from dust, grease, oil, paint, release agents and loosely bonded material.

Pre-wet the surface with clean water before application.

2. Mix with water

Mix Renacon Wall Putty Fine with clean potable water to obtain a smooth and workable paste.

For a 40 kg bag, Renacon’s technical information specifies approximately 16–20 litres of water, depending on the required consistency.

Allow the mixture to slake for approximately 5–10 minutes, then remix before application.

3. Apply the first coat

Apply evenly using a suitable putty trowel or putty blade.

4. Apply the second coat

Allow the first coat to dry for at least 3 hours before applying the second coat.

Renacon specifies a maximum total application thickness of 1.5 mm per coat in its technical documentation.

5. Prepare for painting

After drying, use suitable waterproof emery paper to remove application marks and obtain the required smooth finish before painting.

Coverage

Renacon’s technical information gives an approximate coverage of 16–20 sq. ft. per kg for two coats.

Therefore, a 40 kg bag gives an indicative coverage of approximately 640–800 sq. ft. for two coats.

Actual coverage can vary depending on substrate absorption, surface flatness, surface condition, application method and thickness.

Technical Specifications

16–20 litres per 40 kg

Pot lifeApproximately 2–3 hours

Application temperature5°C–40°C

CoverageApprox. 16–20 sq. ft./kg for two coatsM

Renacon specifies a maximum thickness of 1.5 mm for each coat.

Shelf life9 months from date of manufacture

Standard referencedEN 1015-12:2000

Buying Renacon Wall Putty Fine in Chennai

Looking for Renacon Wall Putty Fine for a house, apartment, commercial building, renovation or AAC block project?

PREMIER INTERGRATORS supplies Renacon construction products for projects in Chennai and surrounding service areas.

Share your approximate requirement or wall area with us and we can help you determine the quantity required and provide the current supply rate and delivery details.

We sell honest value.

Assured Delivery. Each Time and Every Time.

Frequently Asked Questions

What is Renacon Wall Putty Fine?

Renacon Wall Putty Fine is a cementitious polymer-modified wall putty designed to smooth suitable plastered and concrete surfaces before painting.

What is the pack size?

The product is supplied in a 40 kg bag for this listing.

Can Renacon Wall Putty Fine be used on exterior walls?

Yes. Renacon specifies the Fine grade for both interior and exterior applications.

Can it be used on AAC blocks?

Yes. Renacon’s technical documentation lists aerated lightweight blocks among the suitable substrates.

How much water is required for a 40 kg bag?

Approximately 16–20 litres of clean potable water per 40 kg bag, depending on the required consistency.

How much area does Renacon Wall Putty Fine cover?

The manufacturer’s approximate coverage is 16–20 sq. ft. per kg for two coats.

For a 40 kg bag, this works out to approximately 640–800 sq. ft. for two coats, subject to site conditions.

How long should I wait before applying the second coat?

Renacon’s technical information specifies allowing the first coat to dry for at least 3 hours before applying the second coat.

Is Renacon Wall Putty Fine suitable before painting?

Yes. It is designed to provide a smooth, even surface suitable for subsequent painting.

What surfaces can it be applied to?

Suitable substrates include plastered and concrete walls and ceilings, hollow blocks, precast walls and aerated lightweight blocks including AAC blocks, subject to proper surface preparation.

How should the surface be prepared?

The surface should be structurally sound and free from dust, grease, oil, paint, release agents and loose material. The surface should be properly cleaned and pre-wetted before application.

What is the shelf life?

The manufacturer’s technical documentation specifies a shelf life of 9 months from the date of manufacture when stored appropriately in the original unopened packaging.

Do you supply Renacon Wall Putty Fine in Chennai?

Yes. PREMIER INTERGRATORS supplies Renacon construction products for projects in Chennai and surrounding service areas. Contact us with your requirement for current pricing and delivery information.