Specifications, adhesive calculation and other related details in the usage of Renacon AAC blocks that we supply:
Overview
Renacon Autoclaved Aerated Concrete (AAC) blocks is extremely versatile for a non-load bearing construction applications including external walls, internal walls, fireplaces, garden beds, fences, etc.
It has been manufactured from recycled material which offer lightweight, superior acoustic and thermal insulation benefits.
It is a perfect alternate to traditional bricks and concrete blocks which are made available in various dimensions and can be laid in the traditional way.
Adhesive calculation thumb rule
AAC Block wall coverage ===> One block is equal to 1.33 sq feet
Calculate the requirement of Renabond Adhesive depending on your material requirement
| 4 inches | 1 bag for 83 Renacon AAC Blocks |
| 6 inches | 1 bag for 55 Renacon AAC Blocks |
| 8 inches | 1 bag for 42.5 Renacon AAC Blocks |
| 9 inches | 1 bag for 37 Renacon AAC Blocks |
To check out product details of Renabond AAC adhesive click this / To check out product details of AAC Blocks CLICK THIS
PRODUCT SPECIFICATIONS OF GRADE 1 RENACON AAC BLOCKS
Typical values
| Dimensions | Multi dimensions (Refer the Installation manual or Contact our Technical services for requirements and guidelines) |
| Density | 551 to 650 kg/m3 |
| Classifications | Grade 1 and 2 (The autoclaved Cellular Concrete blocks shall be available in two Grades) |
| General | The units shall be free from cracks or other defects |
| Shape | Shall be supplied in rectangular blocks |
| Length In mm | 600 ± 2 |
| Height in mm | 200 ± 2 |
| Width in mm | Available in 100, 150, 200 and 225 mm ± 2 |
| Faces & Arises | The Masonry units Shall be flat and rectangular opposite faces Shall be parallel All arises shall be square Bedding Surfaces shall be at right angles to faces of blocks |
| Surface Texture & Finishes | The Masonry Units Can be ranging from a very fine close texture to Coarse open texture Shall have a sufficient rough surface to afford good key to plaster |
- Renacon AAC Blocks Confirming to IS 2185 Part 3: 1984 (Reaffirmed 2005), an Indian Standard Specification for Concrete masonry units: Part 3- Autoclaved Cellular (Aerated) Concrete Blocks
- Renacon AAC Blocks has been certified by BIS for its quality
- Renacon AAC Blocks has been certified and listed as “Green Product” by GRIHA Council and Green Pro Organisation
- Renacon AAC blocks also meets the Standard Requirements of ASTM C1693-11 and BS EN 771-4: 2003
- Renacon AAC blocks are certified as “Green Product” by various professional organization like “GRIHA”, “Green Pro”, etc.
- Accredited by BIS for meeting the required quality parameters as per IS 2185 Part 3.
Technical Specifications
Standards & Certifications
| Parameter | Unit | Value | Test Method / Standard |
|---|---|---|---|
| Density (Dry) | kg/m³ | Dry Density 550-650 kg/m3 | IS 2185 (Part 3) |
| Compressive strength | MPa | 4.2 for Grade 1 and > 3.5 for Grade 2 (for Density in oven dry condition: 551 to 650 kg/m3) | IS 2185 (Part 3) |
| Thermal conductivity | W/m·K | 0.21 W/mK | IS/ASTM equivalent |
| Sound reduction index | dB | 42 dB | Lab tested |
| Water absorption | % | negligible during construction | IS 2185 (Part 3) |
| Block sizes | inches | 24 length x 8 height. x 4/6/8/9 width | Manufacturer spec |
Warning!
- Product for Professional Use
- Handle with Care; Use PPEs Like safety helmet, Safety Boots, Wear gloves and other
- protective clothing while handling AAC blocks
- Wear Suitable protective clothing, gloves while handling
- For Clarifications and Usage related queries, Contact our Technical Services